Resets submenu
Note
Use this menu with caution. You can lose buffered page data or product configuration settings when you select these
items. Reset the product only under the following circumstances:
z
You want to restore the product default settings.
z
Communication between the product and computer has been interrupted.
z
You are having problems with a port.
The items in the Resets submenu will clear all memory in the product, while
R
ESET
clears only the current job.
Item
Explanation
RESTORE FACTORY
SETTINGS
This item performs a simple reset and restores most of the factory (default) settings. This item
also clears the input buffer for the active I/O. E-mail gateways are not changed, and the local
address book is not cleared.
Resetting memory during a print job can result in data loss.
This item does not affect network settings stored on the HP Jetdirect print server (if installed).
CLEAR MAINTENANCE
MESSAGE
This item appears only after the
PERFORM PRINTER MAINTENANCE
message displays.
OFF
: The
PERFORM PRINTER MAINTENANCE
message will be cleared. If you do not replace the
printer maintenance kit, the
PERFORM PRINTER MAINTENANCE
message will be displayed again
after approximately 17,500 pages.
The message should not be turned off unless the necessary product maintenance has been
performed. If the required maintenance is not performed, product performance will degrade.
For more information, see
“Product maintenance” on page 83
.
B Control panel menus
217
Configure device menu
POWERSAVE
This item allows the user to turn
POWERSAVE
ON and OFF. If
POWERSAVE
is OFF, the product will
never enter PowerSave mode and no asterisk will appear next to any item when the user
enters the
POWERSAVE TIME
menu item. The default value for
POWERSAVE
is ON.
LOCK CARRIAGE
This item allows you to lock the scan head in place when you transpor t the product.
CLEAR ADDRESS BOOK
This item allows you to remove all entries in the local address book.
Item
Explanation
C Product memory and expansion
218
Overview
C